Analisis Efektivitas Robot Pengelasan di PT. ABC menggunakan Metode Overall Equipment Effectiveness
DOI:
https://doi.org/10.61844/jemmtec.v5i02.1387Keywords:
Robot Pengelasan, Overall Equipment Effectiveness, Efektivitas Mesin, Produktivitas ProduksiAbstract
PT. ABC is a manufacturing company that produces hospital equipment. This company started the production of hospital equipment with a production capacity of 20 items per month and within 3 years continued to increase to 60 items. In the process of making hospital equipment using a robot welding machine. The main problem is that there are often jams in the robot welding machine, causing productivity to decrease so that the fulfillment of the company's targets is not met. Therefore, the purpose of this study is to analyze the robot welding machine using the Overall Equipment Effectiveness (OEE) method. The results of the study showed that the OEE value for one month starting from November 1, 2023 - November 30, 2023 was 26%, this value is far below the world standard which has been set at 85%. The low OEE value is caused by availability, performance, and quality rate factors
References
[1] M. Widyantoro dan P. Paduloh, “Analisa Performance Mesin Las Titik Tipe X menggunakan OEE dan Six Big Losses,” J. Mekanova Mek. Inov. dan Teknol., vol. 8, no. 1, hal. 1, 2022, doi: 10.35308/jmkn.v8i1.5223.
[2] Y. Alexander, F. Eko Putra, dan P. Anggun Sari, “Implementation of Total Productive Maintenance on Frame Welding Machine Maintenance Using the Overall Equipment Effectiveness (OEE) Method at PT Electronics Components Indonesia,” Int. J. Innov. Sci. Res. Technol., no. July, hal. 353–362, 2024, doi: 10.38124/ijisrt/ijisrt24jun909.
[3] E. D. Maharani, D. M. Sumarta, dan A. Nurhayati, “Analisis Efektivitas Mesin CO2 Welder dan Mesin Panasonic Robot Welder dengan Menggunakan Overall Equipment Effectiveness (Konstruksi Welding PT. Chitose Internasional Tbk),” Sist. J. Ilm. Nas. Bid. Ilmu Tek., vol. 12, no. 01, hal. 50–63, 2024, doi: https://doi.org/10.53580/sistemik.v12i1.
[4] A. T. Kirana dan W. Widiasih, “Analisis Perhitungan Overall Equipment Effectiveness (OEE) untuk Meningkatkan Efisiensi Mesin Haloong (Studi Kasus: PT Benteng Api Technic, Gresik),” J. Tekst. J. Keilmuan dan Apl. Bid. Tekst. dan Manaj. Ind., vol. 7, no. 1, hal. 59–68, 2024, doi: 10.59432/jute.v7i1.89.
[5] L. del C. N. Corrales, M. P. Lambán, M. E. H. Korner, dan J. Royo, “applied sciences Overall Equipment Effectiveness : Systematic Literature Review and Overview of Different Approaches,” Appl. Sci., vol. 10, no. 6469, hal. 1–20, 2020, doi: https://doi.org/10.3390/app10186469.
[6] Sudirnanto, A. M. Maghfiroh, dan R. Stighfarrinata, “Analysis of the Implementation of Total Productive Maintenance (TPM) Using Overall Equipment Effectiveness (OEE) (Case Study of PT. Pertamina Hulu Rokan Jambi Merang),” Pertamina Hulu Rokan Jambi Merang) JOSSE J. Soc. Sci. Econ., vol. 1, no. 1, hal. 111–118, 2022, doi: https://doi.org/10.37812/josse.v1i1.542.
[7] E. Tammya dan D. Herwanto, “Analisis Efektivitas Mesin Debarker Dengan Menggunakan Metode Overall Equipment Effectiveness (OEE) Di PT. XYZ Kuningan, Jawa Barat,” J. Sains, Teknol. dan Ind., vol. 19, no. 1, hal. 20–27, 2021, doi: 10.24014/sitekin.v19i1.14740.
[8] D. Pratama dan F. Yuamita, “Analisis Efektivitas Mesin Jahit Dengan Overall Equipment Effectiveness (OEE) Dan Failure Mode And Effect Analys (FMEA) (Study kasus : CV. Cahaya Setia Mulia),” JIE.UPY J. Ind. Eng. Univ. PGRI Yogyakarta, vol. 1, no. 1, hal. 23–30, 2021.
[9] D. Febriyanti dan N. Yanti, “Analisis Efektivitas Mesin Welding di PT XYZ dengan Metode Overall Equipment Effectiveness,” Serambi Eng., vol. VII, no. 3, hal. 3365–3374, 2022, doi: https://doi.org/10.32672/jse.v7i3.
[10] J. Kumar, V. Soni, dan G. Agnihotri, “Maintenance performance metrics for manufacturing industry,” Int. J. Res. Eng. Technol., vol. 2, no. 2, hal. 136–142, 2013, doi: 10.15623/ijret.2013.0202009.
[11] P. Dobra dan J. Jósvai, “Assembly Line Overall Equipment Effectiveness (OEE) Prediction from Human Estimation to Supervised Machine Learning,” J. Manuf. Mater. Process., vol. 6, no. 3, 2022, doi: 10.3390/jmmp6030059.
[12] P. G. Yazdi, A. Azizi, dan M. Hashemipour, “An empirical investigation of the relationship between overall equipment efficiency (OEE) and manufacturing sustainability in industry 4.0 with time study approach,” Sustain., vol. 10, no. 9, 2018, doi: 10.3390/su10093031.
[13] G. Michalos, S. Makris, N. Papakostas, D. Mourtzis, dan G. Chryssolouris, “Automotive assembly technologies review: challenges and outlook for a flexible and adaptive approach,” CIRP J. Manuf. Sci. Technol., vol. 2, no. 2, hal. 81–91, 2010.
[14] C. Y. Wijaya dan A. I. G. Widyadana, “Pengukuran Overall Equipment Effectiveness (OEE) di PT Astra Otoparts Tbk. Divisi Adiwira Plastik,” J. Tirta, vol. 3, no. 1, hal. 41–48, 2015.
[15] Y. Nazar, G. Y. Astrini, dan A. S. Putri, “Perhitungan dan Analisis Nilai Overall Equipment Effectiveness (OEE) sebagai Upaya Meningkatkan Produktivitas Mesin AJL Toyota JAT810,” J. Tekst. J. Keilmuan dan Apl. Bid. Tekst. dan Manaj. Ind., vol. 6, no. 2, hal. 80–88, 2023, doi: 10.59432/jute.v6i2.67.
